How to Make Fancy Bracelets Out of String

Download Article

Download Article

Friendship bracelets are fun, easy things to make! You can give them to a friend, or keep them to spice up your own jewelry collection. If your friendship bracelet-making skills are especially refined, you can even sell a few! Start by learning the basic technique, then get fancy by adding simple braids, charms, and beads.

1. 1

   Choose several strands of embroidery thread in a variety of colors. You're the artist here. Choose as many strands of thread as you like, as long as you're using three or more. Go for color combinations that you think would make a pretty pattern. Get creative! If you only use one color of thread, you won't be able to create a pattern.^[1]

   Four to six strands will make a narrow bracelet, and 6-10 strands will make a thicker one. The more strands you chose, the wider the bracelet will be.

2. 2

   Measure and cut your first strand. Measure a length of thread slightly longer than the distance from your fingertip to your shoulder and then cut it. That way, you'll have enough thread for the bracelet to stretch around your wrist to create a pattern. It's better that your string is too long than too short, so cut a longer string when in doubt.

   Advertisement

3. 

   3

   Use the first strand to measure the remaining strands. You want a nice, even bracelet. Hold the cut strand up to the remaining strands and cut them to be the same length as this strand. Spread out the threads so that the colors are in the order you'd like the striped patterns to be. To make the knotted end of your bracelet less bulky, try not to cross the threads over one another too much.

4. 

   4

   Pass the first strand over the second strand to tie a knot. You will need to make the "half-hitch" knot to do this correctly.^[2]

   • First, move the first thread over the top of the 2nd thread. Make sure to leave some of the first strand on the other side so that there is a loop.
   • Bring the first thread behind the second thread and then pull it through the loop.
   • Hold the second thread firmly while you pull on the first thread. As you do this, a knot will move up to the top of the second thread. Now, you're done with your first knot. Not so bad, right?

5. 

   5

   Repeat the same knot using the same strands. After you make the second knot with the first and second strand, you will need to use the first strand to make two knots in the third strand, and then the fourth, and so on. Keep going until there are two knots on every strand.^[3]

   • Make sure that you pull on the thread just until you feel resistance. Be careful not to pull too tight! If some knots are tighter than others, the bracelet will look lumpy and uneven instead of neat and sleek.^[4]
   • Continue knotting the first strand around each successive thread, moving from left to right, until you've knotted all of the strands and the first strand is in the far right position.^[5]

   Advertisement

1. 

   1

   Start the process again with the far left thread. Congrats, you've made it through the first round of knots! Let's keep going. The far left thread will be the new first thread. Every thread will end up on the right when you're done, and you'll start with a new color of thread every time. Repeat the double knot technique with the far left strand, moving from left to right until the strand is in the far right position.^[6]

2. 

   2

   Continue until the bracelet is long enough for your wrist. You've made an awesome bracelet, so you should make sure it fits! Wrap it around your wrist. There should be enough extra room that you (or the person who will wear the bracelet) can fit about two fingers in next to your wrist.

3. 

   3

   Tie the second end of the bracelet into a knot. Make sure that the knot doesn't take up any of the length you need to wear the bracelet.

4. 

   4

   Trim away the additional string. If you still have a lot of string left over, you can snip it off with a pair of scissors.

5. 5

   Tie the bracelet together. Now that you've knotted both ends of the bracelet, just tie the strands of the bracelet together and you're ready to rock it! If you want your bracelet super snug, have a friend knot the bracelet after you put it on.

   Advertisement

1. 

   1

   Add a simple braid. If you want a little extra flair, try a simple braid. The braid will be on either end of the bracelet, so you should start your braid before knotting the main design. Gather neighboring individual strings into groups of two or three so that you have three main threads to braid with (left, center, right).

2. 

   2

   Cross the right strand over the center strand. Take whichever thread is currently in the right position and cross it over the top of the center thread. That thread now becomes the center thread. Next, take whichever thread is currently in the left position and cross it over the top of the center thread so that thread now becomes the center thread.^[7]

   • Now, just repeat! Continue this pattern -- right over center, left over center -- until you've reached the desired length of braid, which should be about an inch (2.54cm) or less.

3. 

   3

   Tie a knot before you begin the main braid. Once you've reached the desired amount of the simple braid, about an inch (2.54cm) or less, tie a knot before you begin braiding the striped pattern.

4. 

   4

   Braid the other end of the bracelet. After you have a good length of the striped pattern, finish off your bracelet with a short length of simple braid.

5. 5

   Add charms or beads to the end of the bracelet. If you feel like your bracelet needs a little something extra, thread some fun charms or beads onto the strands as you braid. Tie them in a knot to secure them.^[8]

   • All done! Give it to a good friend, try your hand at selling it, or keep it if it's too beautiful to part with.

   Advertisement

Add New Question

• Question

  What is embroidery thread?

  

  It's a 6-strand thread that has a looser twist, which allows for a higher sheen.

• Question

  What other materials can I use to make a bracelet?

  

  You can use yarn, string, twine, ribbon, wool, etc. as long as you make sure whatever you choose is not too thick or heavy.

• Question

  Can I make this type of bracelet with yarn?

  

  Yes. You can also make it with other types of thread too. Keep in mind that the finished bracelet will also be thicker.

• Question

  Where could I get string?

  

  StarPhanta

  Community Answer

  Craft stores like Michael's, Jo Ann's, etc. are useful, but the Dollar Store will also probably have what you need.

• Question

  Do you have to have the same amount of thread with every friendship bracelet?

  

  No, you may use different amounts of thread depending on how thick you want the bracelet to be.

• Question

  What if I don't have any charms

  

  That's okay! Charms and beads are optional. Just follow the rest of the steps.

• Question

  Why do we have friendship bracelets when we can just tell the person?

  

  They look nice. You don't have to give one to your friend. You can sell them, or make them for yourself.

• Question

  Can you do this with sewing thread?

  

  Yes, you can but keep in mind that it will be much thinner than the embroidery thread bracelets and the threads will tangle easily. Embroidery thread is cheap at any craft store.

• Question

  What is a friendship bracelet?

  

  It is a bracelet made usually out of thread, twine, or yarn. It's called a friendship bracelet because it is easy to make, so you can make a ton and give them to your friends to symbolize friendship.

• Question

  Can I use beads for my friendship bracelets?

  

  Beads are definitely an option if you would like to have beads in your bracelet. If you don't have beads, just follow the simple instructions!

Show more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Video

• If you do a double knot for the knots, make sure to do it for every knot. Doing two knots in a row of the same thread on each strand will help the bracelet lie flat.

• If you make a bunch, you could sell them for some extra money.

• If you make the knots backwards, the angle of the pattern will be opposite. You can use this to make a bracelet with an arrow shape or a zigzag pattern.

• If your bracelet starts to twist, iron it flat or use a paper clip to hold it straight. Move the paper clip as you work. You can also use a clipboard.

• Don't make the knots too tight or too loose. If you make a knot too tight, it might break or the pattern will not be visible. A loose knot will come undone quickly.

• Try do make the bracelet all in one sitting so you don't forget where you are. If you're worried you will forget the order of colors, write them down.

• Choose your colors carefully. You could use his/her favorite colors, or you could let each color represent something (e.g., red = love, yellow = fun, etc.).

• To help the thread move smoothly while making the bracelet – and possibly avoid breakage if you are pulling it really taut – first coat the strands with wax. To do this, you can pull them across an old candle.

• Put all the different strands of thread loosely on top of each other to see if they work well together.

Thanks for submitting a tip for review!

Advertisement

• Embroidery thread is very thin. Be careful that you do not tie knots in the wrong place. If you do, it's not the end of the world; you can always pick the knots apart with a pair of tweezers or a safety pin, but it's tedious and once in a while causes a thread to unravel or break. It is very hard to untie knots in embroidery thread.

• Do not tie bracelets too tightly onto your wrist, make sure you still have some circulation!

• Try not to get your fingers stuck in the knots or tangle the thread.

Advertisement

Things You'll Need

• Embroidery thread
• Scissors
• Safety pin(s),clipboard or tape
• Beads and/or charms (optional)

About This Article

Thanks to all authors for creating a page that has been read 5,564,597 times.

Did this article help you?

How to Make Fancy Bracelets Out of String

Source: https://www.wikihow.com/Make-a-Friendship-Bracelet

Share this post